AVIRIS correction help, ".atm files must be resampled with new .bp7"

[AuxiliaryPie]

Hello, I am trying to process an old AVIRIS image (from the GRSFE project) and ran into a few issues.  Originally I had planned on using the predefined AVIRIS_98 sensor but it only offers bands 1-62, so I simply updated the sensor (saved under a new name) to include 1-224 bands.  The real issue I have now is when I proceed to run Image Processing, I get the following errors:

"*** Error: .atm files must be resampled with new .bp7 ***"
"*** Update the .bp7 files in atm_database !"

From what I have been able to gather, .bp7 files are the atmospheric files?  I re-downloaded all of them (except for GMTED Elevation Data) but ATCOR is still giving me the error.  Any help at all would be greatly appreciated!

Hi, updating the bp7 files should be possible through the interface. Please check if you got the correct ones in the directory 'atm_database'. They should have a size of 39.6 MB each. After installing the new bp7 files, the RESLUT module is to be run for all sensors. This will re-create the sensor-specific LUT files (situated in atm_lut) with the new format. The format changed with Version 7.0 of ATCOR in 2015.

Thanks for the reply! I've run RESLUT on my Aviris sensor (as well as all the other ones) with the newly downloaded .atm files but I am still seeing the same errors. I am unaware of a folder named "atm_lut", could that be my problem? Perhaps the RESLUT products are not being stored properly? Thanks again for the help, it is much appreciated.