Aligning the images

[natalia]

After doing the 'Direct Processor', my data is misaligned (see attachment). I only have raw data, syn file, and gps data. Do you have any idea how I can fix this misalignment? 

Aligning the images requires a boresight calibration to be performed. In PARGE, there are 3 option to do so:
- with respect to GCPs (manually)
- with respect to an orthophoto (semi-automatic)
- from image to image (automatic)

Once you got a good boresight calibration, the results may be used for a whole campaign - but thisrequires an accurate DSM and a stable, well preprocessed IMU/GPS data stream to work properly. 

The process requires some testing and learning to get good results.